So, unfortunately it's not always a straight forward answer. I only demonstrate for UCS systems, but here is my best attempt from that perspective.
Assuming the following:
- Fiber Channel SAN
- ESXi 5.0
For EDA in the "installdisk" parameter: =fnic
Standard 5.0 U2 or newer ISO will work.
Server Profile:
Boot Order, 1. LAN (So you can PXE boot), 2, SAN
You need to target your Directors/Storage Processors where the LUN will be delivered from.
LUN ID delivered should be standardized from your array. Most often this should be LUN ID 0 or 1, but that is your preference. I would just recommend you remember that 'preference'.